Introduction
Modular design in various versions:
Compact, sensor and electronics unit forming a single unit
Separate, sensor and electronics separated, joined by a cable
Various possibilities of pipe fittings:
Flange: DIN, ANSI, JIS standards etc.
Sandwich: for DIN, ANSI, JIS flanges etc.
Sanitary: DIN 11851 thread, ISO 2852 Clamp, SMS 1145 thread
Sanitary welding: DIN 11850, ISO 2037 standards
Working pressure manufacturing according to
PED97/23/CE (Lloyd’s Register Certificate Nº 031)
Sensor liners PP, PTFE, PVDF & Hard rubber Electrodes in
316L Stainless Steel, Hastelloy C22 (UNS-06022), Zirconium,
Titanium, Tantalum. Exterior construction is in 316L Stainless Steel.
Benefits
- Flow rate measurement is independent of the flow profile
- Pulsed coil excitation to obtain a minimum zero drift
- Readings are independent of density, temperature, viscosity and pressure
- Absence of obstructing elements gives zero pressure loss and will allow the pass of solids
- Can be mounted in any position, provided that the pipe is always full
- Low power consumption
- Good stability with temperature and age
- No moving parts provides zero maintenance
- Can be installed with short straight pipe sections (5DN / 3DN)
- Good chemical resistance of construction materials
- All electronic control units for use with all sensors
Manufacturer:
TecfluidAdvantages:
- Measurement of conductive fluids
- No moving parts
- Suitable for dirty liquids
- Readings independent of Density and Viscosity
- Various wetted parts available-
- Offering high Corrosion resistance
